Jiahua-Thermoplastic polyurethane

summary:

Thermoplastic polyurethane elastomer (TPU) is a kind of elastomer that can be plasticized by heating and dissolved by solvent. It has excellent comprehensive properties such as high strength, high toughness, wear resistance, oil resistance, and good processing performance. It is widely used in footwear, medical, food, consumer electronics, packaging, industrial supplies, automotive, military products, textiles and other industries.

Thermoplastic polyurethane elastomer, with its excellent performance and wide application, has become one of the important thermoplastic elastomer materials. There are many physical crosslinks formed by hydrogen bonds between linear polyurethane molecular chains, and the hydrogen bonds play a role in strengthening its morphology, thus giving many excellent properties, such as high strength, good toughness, wear resistance, cold resistance, oil resistance, water resistance, aging resistance, weather resistance, etc. At the same time, it has many excellent functions, such as high water resistance, moisture permeability, wind resistance, cold resistance, antibacterial, mold resistance, warmth retention, UV resistance, and energy release. These good properties make thermoplastic polyurethane widely used in shoes, cables, clothing, automobiles, medicine and health, pipes, films and sheets and many other fields. The final products generally do not need vulcanization and crosslinking, which can shorten the reaction cycle and reduce energy consumption. Because it is basically a linear structure polymer, it can be processed with the same technology and equipment as thermoplastic plastics, such as injection molding, extrusion, blow molding, calendering, etc. It is especially suitable for large, medium and small size components produced in large quantities. Waste materials can be recycled and reused. Different additives or fillers can be used in production or processing to improve some physical properties and reduce costs.

Jiahua Chemical is a global multinational enterprise integrating R&D, production, sales and technical support. Its TPU polyester and polyether products provide comprehensive solutions for the world with different performances.

Protective sleeve solution：

Product introduction:

Mobile phones and tablets carry a large amount of information in their hands and infinite wonderful mobile devices. In today's era of science and technology, mobile phones and tablets have become indispensable to life, as well as another characteristic "business card" of people, symbolizing personal freedom and taste. As a result, the mobile phone and the tablet jacket shine brightly, helping people interpret their own personal style. The soft adhesive TPU mobile phone jacket has become the mainstream material in the mobile phone jacket market due to its excellent performance, such as environmental protection, non-toxic, harmless, odorless, soft and comfortable feel, easy coloring, good toughness and deformation resistance, and high transparency. The market prospect is broad.

Jiahua Chemical Polyurethane TPU provides "you" mobile phones and tablets with a full range of solutions, such as high transparency and colorful clothes, lasting appearance maintenance, action protection from different angles, and close contact with human skin.

Jiahua Chemical - Main brand of sheath:

Independent injection molding grade: JH-A31 series (ordinary grade, high transparency grade, UV grade, chemical resistance grade, antibacterial grade, etc.)

Cladding grade: JH-A11 series (ordinary grade, high transparency grade, UV grade, chemical resistance grade, antibacterial grade, etc.)

Technical indicators:

Note: The data in the table are typical test values, not product performance indicators

Product features:

1. High transparency

2. Excellent mechanical properties

3. Excellent UV resistance stability

4. Scratch resistance

5. Excellent chemical resistance

6. Dry touch, close to skin

7. Excellent processing performance, fast crystallization, etc

8. Post process oil injection, electroplating, watermark, etc

9. It can cover ABS, PC, PC+ABS, PCTG, PMMA, etc

Footwear Solutions：

Product introduction:

The concept, connotation and function of shoes are closely related to this new ideal and way of life. People use the shape and connotation of shoes to decorate themselves and show themselves, obtaining a kind of aesthetic pleasure and symbolic spiritual satisfaction, and also increasing people's life and travel comfort.

At present, the shoe material is the largest application market of TPU products. TPU is widely used in the fields of shoe soles, midsole, trim pieces, etc. with its good mechanical properties, excellent wear resistance and skid resistance, excellent flexibility and good processing performance. Jiahua Chemical is committed to researching the application, development, production and sales of TPU in the field of shoe materials, and providing global all-round shoe material solutions.

Application of Jiahua Chemical TPU in the field of shoe materials: outsole, midsole and various shoe materials

Jiahua Chemical - Main brand for shoe material application:

Injection grade: JH-A21 series (ordinary grade, high transparency grade, UV grade, wear-resistant grade, etc.)

Technical indicators:

Note: The data in the table are typical test values, not product performance indicators

Product features:

1. High transparency

2. Excellent mechanical performance, bending resistance and high resilience

3. High resilience and compression resistance

4. Excellent wear resistance

5. Excellent UV resistance and stability

6. Excellent chemical resistance

7. Hydrolysis resistance

8. Lightweight

9. Excellent processing performance and post process spraying, watermark, etc

Industrial supplies solutions：

Product introduction:

TPU has excellent mechanical strength, excellent wear resistance, water resistance, oil resistance, high and low temperature resistance, excellent resilience, fatigue resistance and dimensional stability. Its application in the seal industry can surpass many traditional materials and show better application effect. Jiahua Chemical is committed to researching the application, development, production and sales of TPU in the field of sealing rings, and providing global all-round sealing ring solutions.

Application of chemical TPU: hydraulic seals, piston seals, piston rod seals, dust seals, pneumatic seals.

Jiahua Industrial Products Main Brand:

Injection grade: JH-D11 series (ordinary grade, high permeability grade, wear-resistant grade, oil resistant grade, etc.)

Technical indicators:

Note: The data in the table are typical test values, not product performance indicators

Product features:

1. Excellent compression set rate and dimensional stability

2. It is applicable to the construction machinery industry and can accept the application challenges of extreme environments

3. High strength, high elasticity, high heat resistance, low temperature resistance, hydrolysis resistance, high wear resistance and oil resistance,

4. High quality products, improve production efficiency, reduce costs, and gain stronger competitive advantage.

Intelligent wearable solutions：

Product introduction:

The smart bracelet is a wearable smart device, which can record real-time data such as exercise, sleep and diet in our life, and record these data synchronously with smart phones and computers, so as to guide the role of healthy life through these data. Jiahua Chemical is a global multinational enterprise committed to the intelligent development of science and technology, material R&D and polymerization production. Through continuous development, Jiahua chemical functional material thermoplastic polyurethane TPU provides a comprehensive intelligent wearable solution for the world.

Jiahua Chemical Intelligent Wear Main Brand:

Injection grade: JH-A10 series (ordinary grade, high transparency grade, UV grade, chemical resistance grade, antibacterial grade, etc.)

Technical indicators:

Note: The data in the table are typical test values, not product performance indicators

Product features:

1. Excellent mechanical properties

2. High resilience

3. Excellent scratch resistance and abrasion resistance

4. Excellent UV resistance stability

5. Excellent chemical resistance

6. Dirt resistance

7. Dry touch, breathable and close to skin

8. Hydrolysis resistance

9. Excellent processing performance

10. It can cover ABS, PC, PC+ABS, PCTG, PMMA, etc

Ergonomic TPU Cladding Solution：

Product introduction:

TPU coating products are a major field of application of thermoplastic elastomer. With excellent resilience and shock absorption performance, comfortable hand feel and good elastic touch, it can improve the touch of the product, enhance the grip, and has excellent anti-skid performance. It can be coated and bonded with PP, PE, PS, ABS, PC, PA and other base materials through twice injection molding, and is widely used in daily life products.

Jiahua chemical functional material thermoplastic polyurethane TPU provides all-round ergonomic solutions for the world.

Jiahua Chemical - main brand of coating grade:

Injection grade: JH-A20 series (ordinary grade, high transparency grade, UV grade, chemical resistance grade, antibacterial grade, hydrolysis resistance, etc.)

Technical indicators:

Note: The data in the table are typical test values, not product performance indicators

Product features:

1. Excellent mechanical properties

2. Excellent scratch resistance and abrasion resistance

3. Excellent weather resistance

4. Excellent chemical resistance

5. Hydrolysis resistance

6. Excellent processing performance and fast crystallization

7. It can cover ABS, PC, PC+ABS, PCTG, PMMA, etc

High and low hardness solutions：

Product introduction:

High hardness: high resilience, high strength, high bearing, high compression resistance, high temperature resistance, high wear resistance, etc

Soft TPU has excellent dirt resistance, smoothness, excellent soft touch, skin affinity and scratch resistance, as well as good shock absorption and cushioning performance, combined with its own excellent mechanical strength and wear resistance, and is widely used in the field of intelligent home appliances and intelligent wearable devices that are expanding in scale.

Low hardness: low pressure shrinkage deformation, filling to maintain wear resistance and sealing, etc

Jiahua high and low hardness main brand:

Injection grade: JH-A10 series (ordinary grade, high transparency grade, UV grade, chemical resistance grade, hydrolysis resistance, high wear resistance, etc.)

JH-A11 series (ordinary, high transparency, UV, chemical resistance, hydrolysis resistance, etc.)

Technical indicators:

Note: The data in the table are typical test values, not product performance indicators

Product features:

1. Excellent mechanical properties

2. Excellent wear resistance

3. Excellent fatigue resistance

4. It can cover ABS, PC, PC+ABS, PCTG, PMMA, etc

 Thin Film Solutions：

 Product introduction:

TPU thin film is a kind of thin film made from TPU granules by special processes such as calendering, tape casting, blown film and coating. TPU thin film is an important application form of TPU materials. Due to the environmental protection, non-toxic, superior performance and easy recovery and decomposition of TPU, TPU film is increasingly popular and widely used in the automotive industry, footwear, fabric fitting, clothing, chemical, electronic, medical and other industries. Jiahua chemical functional material thermoplastic polyurethane TPU provides film product solutions for the world.

Jiahua TPU film main brand: Extrusion grade: JH-A12 series

Technical indicators:

Note: The data in the table are typical test values, not product performance indicators

Product features:

1. High transparency

2. High moisture permeability

3. Air permeability

4. Cold and heat resistance

5. Wear resistance

6. High mechanical strength

What services does Jiahua Chemical provide？

1. Provide multiple functions of thermoplastic polyurethane materials

2. Complete logistics supporting services

3. Solutions conforming to international safety regulations

4. Complete solution

5. Greater design freedom and more efficient manufacturing process

6. Technical support/sales team